Short answer: Correction "stages" refer to how many distinct polishing passes a car needs to remove its specific defects — not a sales tier. A 1-stage enhancement polish handles light marring on newer paint (from $400). A 2-stage standard correction adds a cutting pass before the finishing pass for daily-driver swirl accumulation (from $600). Multi-stage restoration adds wet-sanding and additional compounding for deep defects or neglected paint (inspection-based quote).
1-Stage: Enhancement Polish
A single finishing pass with a light polish, designed for paint that's already in good shape — newer vehicles, or cars that have already been corrected and just need a gloss refresh. It improves clarity and depth but won't remove moderate-to-heavy swirling. Right for a car under a year or two old with light marring only.
2-Stage: Standard Correction
The baseline for most daily drivers that come through the studio: a cutting pass to physically level and remove existing swirl marks, scratches, and oxidation, followed by a finishing pass to refine the clear coat back to full clarity and gloss. This is what most cars need before a Revivify coating goes on, since coating over uncorrected paint locks the defects in permanently.
Multi-Stage: Restoration
Reserved for deep defects — heavy oxidation, years of accumulated damage, or concours-level prep — that a standard 2-stage pass can't fully resolve. This can include wet-sanding to physically level more severe imperfections before compounding and polishing. Always quoted after an in-person inspection, since the amount of clear coat available to work with varies car to car.
How We Decide What Your Car Needs
Every inspection starts with a paint-thickness gauge reading on each panel and a look under SunGun and LED swirl lighting. That tells us exactly how much clear coat is available and exactly what defect category we're dealing with — not a guess based on the car's age or mileage. See the full inspection process in our what happens during an inspection guide.
Frequently Asked Questions
Can I request a specific stage, or do you decide?
We'll always tell you honestly what your paint needs after inspection — including if a lower stage than you expected is genuinely enough, or if a higher one is necessary to get a lasting result.
Does a higher stage remove more clear coat?
Yes, each additional pass removes a small, measured amount of clear coat. That's exactly why we gauge every panel first — to confirm there's enough material to safely correct.
Do all cars eventually need multi-stage correction?
No. A car that's coated after its first correction and washed properly going forward often only ever needs 1-stage refresh polishes in the future. See our coating lifespan guide for why.
Not sure which stage your car needs? Book an inspection at The Recon Pros — we'll gauge it and tell you straight.

